RK-2002 RUKRA Fireman intercom

RUKRA Fireman panel flush mount  HxW190x110mm       Panel with Fireman switch 120x110mm

Productinformation

- The RUKRA Fireman Intercom is supplied including the lift phone in the elevator cabin,
    a red telephone for the engine room and the fireman intercom including a flush mount panel.
- Once the fireman switch is activated there will be made a clear speak and listening connection between
    the fireman intercom on the floor, the elevator cabin and the machine room.
- The fireman intercom is always delivered as a set
 
This set consists:
- RUKRA Elevator Phone in the Cabin
- RUKRA Elevator Phone (with special software) on the firemanfloor with flush mount panel
- RUKRA Telephoneswitch with special fearures and software
- Red Telefphone in the Machineroom
 
Opstellings schema

Specifications

BASEUNIT
• Conform NEN 81-72
• 2 Wires connection between all modules
• Alarmbuttons in Cabin N.O. / N.C.
• Automatic alarmbutton(s) test
• Automatic audiotest (Speaker and microphone)
• Screw connectors for extra speaker, microphone and LED’s
• Double indication leds green and yellow
• Alarmfilter for alarmbutton in cabin
• Audio settings adjustable from distance
• Plug & Play with Phoenix connectors
 
POPULAIR OPTIONS
 
TECHNICALL
• Power 12/24VDC
• Plug & Play connectors
• Surface and Flush mount carpanels
• Flush mount floorpanel 190*110mm
• Red Led's in pushbutton (speak) floorpanel
• Programming local or from distance
• Compact size speakmodules 100*90*22mm
• Article number: RK-2002
 Fireman Switsh   Red Phone  Pictogram brandweerintercom 100x100mm

Programming

When you receive the RUKRA Fireman intercom set we preprogrammed it for you with your settings (Phonenumbers, tests etc) but if you want to reprogram it by yourself there are 5 simular ways to do that:

Locally you can program the speakmodules with the Smart Programmer, with a Tablet / Laptop or from the intercom.

Remotely you can program with a regular (mobile) Telephone or a Computer with Black-Box modem.

Remotely with a Telephone:

1- Call the RUKRA Elevator Phone by (mobile) phone,
2- After the RUKRA elevator phone has picked up the line you are in the speak mode,
    Entering the programming menu:
3- Press key # 0000 (password is 0000) if the password is oke you will hear a three-tone beep to confirm,
    then you have 10 seconds to start programming.
(NOTE !!: After programming a function, you must wait until the RUKRA elevator phone beeps 1 second, then the programming is stored in the memory.
Download here the short programlist (70Kb)
Locally with a Telephone and the Smart Programmer:
1- Connect the Smart Programmer to the RUKRA Elevator Phone and pick up the handset of the Telephone,
2- Push The Alarmbutton, in, or on the Elevator for 5 seconds and wait till the the Elevator Phone starts calling,
    now you there is a speak connection between the Smart Programmer and the Elevator Phone,
    Entering the programming menu:
3- Press key # 0000 (password is 0000) if the password is oke you will hear a three-tone beep to confirm, then you have 10 seconds to start programming.
(NOTE !!: After programming a function, you must wait until the RUKRA elevator phone beeps 1 second, then the programming is stored in the memory.
Download here the short programlist (70Kb) 
 
Locally from the machineroom Intercom:
1- Pick up the handset of the Telephone in the Machineroom,
2- You will be automaticly connected with the Elevator Phone in the Elevator,
    now you there is a speak connection between the intercom and the Elevator Phone,
    Entering the programming menu:
3- Press key # 0000 (password is 0000) if the password is oke you will hear a three-tone beep to confirm, then you have 10 seconds to start programming.
(NOTE !!: After programming a function, you must wait until the RUKRA elevator phone beeps 1 second, then the programming is stored in the memory.
Download here the short programlist (70Kb)
 
Locally with a computer and USB cable:
1- Dowload and install the program "RUKRA Elevator Setting",
2- Dowload and install the drivers for the USB cable,
3- Download the settings from the RUKRA Elevator phone and change the parameters that you want to reprogram.
 
OnLine Programmingservice:
Send an This email address is being protected from spambots. You need JavaScript enabled to view it. with the phonenumber of the line and the parameters that must be changed and we will do that for you
 

Software

RUKRA Elevator Setting Programm  (ZIP 4.5Mb)

 
NOTE!! The drivers for the USB-Cable will not automatic be installed by Windows, read the
NOTE!! When you have problems with installing the software or drivers in Windows 8 read the