RK-2007 RUKRA Monitoring module

Productinformation

With the RUKRA monitoring module you can count the numbers of starts of the elevator and it gives the elevator a command by carbutton (no Canbus) if there is no start during a preset time.

 
When a carbutton in the cabin is activated once in the 4 hours by the monitoring module, the elevator will make a start, when in the 4 minutes after the command no start has been registrated the module will send an error message to the RUKRA web-based call center indicating that the lift is probably in a fault.
 
The module can also remotely test the elevator to make a start and this start can be checked with the position of the start counter.

Every time the elevator phone makes a three day test to the call center it gives the current state of the start counter and this state will be registered automatically.
 
If the counter runs a preset number of starts then will be sent a message to the call center, so you know exactly when the elevator for example requires maintenance and service.

Specification

TECHNICALL

• Power: 12-24V DC

• Power consumption: Standby: 65mA

• Inputs: 3

• Outputs: 3

• Switch time inputs: Max. 99 minutes or 99 seconds

• Switch time outputs: Max. 99 seconds

• Start counter: Max starts before calling current state to the call center: 990K

• Current output 1+2: 0,5A

• Current output 3: 2A

• Article number: RK-2007

• Installation: The RUKRA Monitoring module can direct be mounted on the back of the RUKRA Elevator Phone

Programming

Locally with a computer and USB cable:

The RUKRA Monitoring Module must be connected with the powersupply and with the RUKRA Elevator Phone
1- Dowload and install the program "RUKRA Elevator Setting",
2- Dowload and install the drivers for the USB cable,
3- Download the settings from the RUKRA Monitoring module and change the parameters that you want to reprogram.

(c) RUKRA Europe B.V.

Joomla! Debug Console

Session

Profile Information

Memory Usage

Database Queries